How Cel-Fi GO Smart Signal Booster Works
If you’re wondering how Cel-Fi works, keep reading! This article will reveal three reasons it The CelFi Go boost and improves mobile phone reception. First, it is carrier-specific. Second, it does not interfere with the network. And third, it does not negatively impact signal quality. Let’s look at how Cel-Fi works! To get started, simply purchase a Cel-Fi Smart Signal Booster. It can improve your signal by as much as three times.
Three reasons why Cel-Fi improves mobile phone reception
One of the most important things to improve cell phone reception is to keep it in good condition. Cell phones receive the best reception when they are in close proximity to the cell tower. If you can’t reach the tower, you can move closer to an open window or terrace. However, these changes won’t help much if the object blocking the reception is made of metal, wood, or concrete. Therefore, removing the internal clutter is essential.
Cell phone reception in buildings is usually poor due to the construction materials used to construct the building. Metal and concrete blocks cellular signals. This makes it difficult for people to receive two bars of signal. Cell repeaters can help to overcome this problem by bypassing the blockage effect created by building walls. And while you might be wondering whether or not cell repeaters really work, you can take a look at the examples below to find out if it is worth investing in a device.
How Does Cel-Fi Work?
A Network Unit (NU) and a Coverage Unit (CU) make up the Cel-Fi (CU). The NU is placed in a region with the strongest carrier network signal. The CU is placed where the finest signal quality is required the most.
The two units connect wirelessly, resulting in dramatically improved voice quality and data throughput in an area of up to 13,000 square feet. It doesn’t need an Internet connection, extra antennae, or wiring to work.
Cel-Fi GO Portable Kits are engineered to give an industry-leading 65 dB gain in mobile mode, delivering the best voice/data wireless performance; and a 100 dB gain in stationary mode, which is 1,000x more than competing solutions on the market.
The kits include the only carrier-class solution that can transition between two modes for mobile cellular coverage and stationary indoor/outdoor installation.
DH Wireless Solutions, Campad Electronics, and 4K Solutions all have Cel-Fi GO Portable Kits in stock.
It is carrier specific
A Cel-Fi signal booster can boost your wireless signal, but it is important to note that it is carrier specific. You will need to register your phone with your carrier to use the device. Then, simply download the accompanying smartphone app. The Trucker pack offers up to 100 dB of gain, which is more than 1000 times stronger than standard signals. This makes it ideal for boaters and RVers. Alternatively, you can choose to use a patch antenna instead.
If you use AT&T or T-Mobile, your Cel-Fi Smart Signal Booster should be compatible with both networks. Some small operators are owned by the same parent company as AT&T and T-Mobile, and have matching PLMN-IDs. A Cel-Fi unit that matches the carrier of your mobile network should work for both. If you use a signal booster from Virgin Mobile, for example, your device may display the name of the parent company, and will not work with an AT&T or T-Mobile device.
It does not interfere with the network
Cel-Fi is a wireless network booster from Nextivity, which has recently received certification from AT&T, T-Mobile, Sprint, Verizon, and GCI Alaska. Cel-Fi Smart Signal Boosters are approved for use by regulators in a total of 44 countries and territories including Australia. Its technology provides an unlimited gain at a low cost per square foot, and is network-safe. Its products can be installed in multiple-story buildings, vehicles, and other environments. Users will find it easy to install and use.
Cel-Fi is a wireless technology that provides coverage up to 13,000 square feet. Multiple units can be installed in an office to increase coverage strength. Because Cel-Fi is wireless-in/wireless-out, it does not interfere with the network. The Network Unit receives the mobile network signal and relays it wirelessly to the Coverage Unit, which then amplifies the signal up to 100 dB.
Examples Of Cel-Fi in Use
When it comes to remote areas, Australia has a lot of them with poor cellular coverage at best. Consider the case of WA Main Roads, based in Western Australia.
They possessed a donga, which is a metal structure (building) positioned near a crossroads on the Great Southern Highway near Albany. The donga blocks cellular signals due to the materials used in its construction.
The issue was that the nearest cell tower was 25 kilometres away, perched on a hill.
As a result, individuals within the structure were lucky to acquire a 3G signal.
Nurrunga installed a Cel-Fi GO building unit with an external 3G/4G Yagi aerial and roof mount antenna as a remedy.
People were able to acquire a strong and consistent 3G signal both inside and outside the donga once it was built. Even better, the customer claimed to be receiving 4G signal strength that was superior to what they were getting standing right next to the mobile tower.
Cel-Fi In Vehicle Use
Managing field employees and service personnel can be difficult, especially when mobile phone coverage is inadequate. Consider a carpenter business with many vans, where maintaining a strong phone signal is critical. Managers in this industry rely on frequent communication with their chippies to inform them of new works that need to be completed, to keep them up to date on scheduling conflicts, and to obtain information about parts and product orders that need to be dispatched, among other things.
The carpenters also need cellular access to communicate with consumers and to handle credit and debit card payments from their mobile card readers. Regrettably, things do not always function as they should.
Carpenters frequently find themselves driving through or working in isolated areas with inadequate phone coverage, causing calls to be dropped. In the end, phone service outages can lead to miscommunications, inefficient operations, and dissatisfied consumers.
Cel-Fi GO Mobile is the ideal choice for any business where maintaining constant phone touch with field workers or service staff is crucial.
This Is How It Works
Install the external antenna on the vehicle’s roof.
Install the server antenna into the Cel-Fi GO Mobile unit.
Place the mobile phone in it’s car cradle
Get out on the road and help those customers.
The Cel-Fi Go is a very popular option for those who need an amplifier for their cell phone signal. It is very easy to use and can be set up in minutes.
The Cel-Fi Go comes with everything you need to get started, including an indoor antenna, outdoor antenna, power adapter, and a mounting kit. It also has a built-in battery that will allow it to work for up to 8 hours on a single charge.
The Cel-Fi GO can amplify the signal for multiple devices at the same time and supports LTE, 4G, 3G, and 2G frequencies.
If you are looking for an amplifier that is easy to use and comes with everything you need to get started, the Cel-Fi GO is the perfect choice for you.